Lowering Springs, Set Of 4, 2.0"/3.0" Drop

2002 - 2009 Trailblazer


There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2002-2009 Trailblazer needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP640 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your V-8-equipped 2002-2009 Trailblazer 2-inches in the front and 3 inches in the rear. These springs feature a fine-tuned spring rate to give you great handling and a smooth ride. The honed in spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP640 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.


- Lowers your V-8-equipped 2002-2009 Trailblazer 2-inch in the front and 3 inches in the rear.
- Improves handling and ride quality
- Linear spring rate with a working rate of 376lb/in front
- Dual spring rate with a linear working rate of 215lb/in rear
- Manufactured from chrome silicon high-tensile spring wire
- Cold wound on a CNC Coiling Machine to exact specifications
- Lifetime warranty against spring sag
- Stress-relieved at 750 degrees F
- Shot-peened
- Computer tested for accurate height and spring rate
- Fits V8 Models Only
- Made in the U.S.A.

2002 - 2009 Trailblazer
Available Colors
Red Powercoat
Privacy Policy Desktop Site
Copyright © 2016  |  All Rights Reserved